Hex Bolt

Hex Bolt(Hexagon Bolt/Screw) 1.Material:Carbon steel 2.Head mark:OEM 3.Dia:1/4-1" (ANSI),M5-M36(DIN) 4.Length:5/8-14"(ANSI),16-400MM(DIN) 5.Standard:ANSI,DIN,AS,BS and etc 6.Example:DIN931,DIN933,DIN571,A-10,A-6,ISO4014,ISO4017,etc 7.Production Processing:Cold forged or Hot forged 8.Surface:Plain,Zp,Hdg and Black zp 9.Quality: Approved and assured and can provide English test report 10.Machine:Forged machine, Heat treatment Equipment, Drawing machine, etc 11.Mould: We open by ourself 12.Usage Scope:Guardrail and railway etc 13.Packing:General carton then pallet packingor small box then into carton then in pallet packed 14.Delivery time:20-30days after confirmation of order or receipt of depoist 15.Payment term:T/T or L/C A.Definition A screw, or bolt, is a type of fastener characterized by a helical ridge, known as an external thread or just thread, wrapped around a cylinder. Some screw threads are designed to mate with a complementary thread, known as an internal thread, often in the form of a nut or an object that has the internal thread formed into it. Other screw threads are designed to cut a helical groove in a softer material as the screw is inserted. The most common uses of screws are to hold objects together and to position objects. Often screws have a head, which is a specially formed section on one end of the screw that allows it to be turned, or driven. Common tools for driving screws include screwdrivers and wrenches. The head is usually larger than the body of the screw, which keeps the screw from being driven deeper than the length of the screw and to provide a bearing surface. There are exceptions; for instance, carriage bolts have a domed head that is not designed to be driven; set screws have a head smaller than the outer diameter of the screw; and J-bolts do not have a head and are not designed to be driven. The cylindrical portion of the screw from the underside of the head to the tip is known as the shank; it may be fully threaded or partially threaded. The majority of screws are tightened by clockwise rotation, which is termed a right-hand thread. Screws with left-hand threads are used in exceptional cases. For example, when the screw will be subject to anticlockwise forces (which would work to undo a right-hand thread), a left-hand-threaded screw would be an appropriate choice. B.Differentiation between bolt and screw There is no universally accepted distinction between a screw and a bolt. The Machinery's Handbook describes the distinction as follows: A bolt is an externally threaded fastener designed for insertion through holes in assembled parts, and is normally intended to be tightened or released by torquing a nut. A screw is an externally threaded fastener capable of being inserted into holes in assembled parts, of mating with a preformed internal thread or forming its own thread, and of being tightened or released by torquing the head. An externally threaded fastener which is prevented from being turned during assembly and which can be tightened or released only by torquing a nut is a bolt. (Example: round head bolts, track bolts, plow bolts.) An externally threaded fastener that has thread form which prohibits assembly with a nut having a straight thread of multiple pitch length is a screw. (Example: wood screws, tapping screws.)